若不是有跨網段的需求,其實static route用到的機會少之又少,畢竟一般人所處的環境是簡單不過了!一般的狀況下,大家只會有區域網路的routing,再來則...
redhat static route設定 相關文章
-
Static routes are for traffic that must not, or should not, go through the default gateway. Routing is often handled by ...
-
To permanently configure static routes, you can configure them by creating a route-interface file in the /etc/sysconfig/...
-
2018年5月16日 — 情境: 當目的ip 為192.168.50.0/24 的時候,不走default route,改經由eth1 到192.168.10.254 編輯/etc/sysconfig/network-
-
You can configure the static route as follows: For a simplified configuration, set this static route only on Router 1. H...
-
2018年12月4日 — linux下靜態路由修改命令方法一: 添加路由 route add -net 192.168.0.0/24 gw 192.168.0.1 route add -host 192.168.1.1 dev 192....
-
在RHEL 8系统中,可以使用「ip route」命令来配置静态路由。 例如,为了将目标网络192.168.10.0/24通过网关192.168.1.1进行路由,您可以在终端中使用以下命令:
-
2014年4月22日 — 上圖為我們的環境架構。 我們主要的設定皆在NAT Server(CentOS 6.5)上,eth0為10.10.1.1/16, Gateway為10.10.0.254,eth1為192.168.212.82/3...
-
其實多個IP 在一塊網路卡上面的設定很簡單啦!就只要記得一個概念就夠了,那就是網路界面卡( Network Interface Card, NIC )與網路界面( Interface )不 ...
-
linux.router1> show ip route Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - ISIS, B - BGP...
redhat static route設定 參考影音
繼續努力蒐集當中...